Search Results for “respiratory-protection”

Hycar rubber facepiece with a widefield lens. Exceeds the CBRN permeation standards. Single port canister mount. Facepiece only.

These tinted lens covers are used with 3M full facepieces 6000 Series and help shield eyes from bright light which relax eyes to make focusing outdoors easier.

Tychem® QC hood for MSA OptimAir TL PAPR kit is made with polyethylene coated Tyvek®. Available as single-bib or double-bib.

This AirHawk SCBA comes with an Ultra Elite style facepiece, 30 minute Aluminum or carbon-wrapped cylinder, rubber or Speed-ON head harness and optional hard case.

This AirHawk SCBA comes with an Advantage 4100 facepiece, 30 minute Aluminum or carbon-wrapped cylinder, rubber or Speed-ON head harness and optional hard case.

Low-pressure MSA Aluminum SCBA cylinder rated for 30 minutes of use time. 18 lbs, non-magnetic and corrosion-resistant.

Sperian Survivair Opto-Fit Tactical Gas Mask with 5-point strap comes with an anti-scratch polycarbonate lens. The three position canister mounting makes the mask adaptable to various applications.

Carbon wrapped 30 minute SCBA cylinders from MSA are very light and strong. This particular cylinder is a low pressure, 8 pound SCBA bottle that provides comfort and ease of motion.

45 minute high pressure MSA SCBA cylinder wrapped with carbon. This cylinder weights 9 pounds, resists corrosion and is non-magnetic.

The extended life PAPR battery pack offers 8 hours of run time for the OptimAir TL unit.

Wide-field polycarbonate lens, Hycar rubber or silicone facepiece. Advantage bayonet-style cartridges, sold separately. Facepiece only.

These MSA PAPR cartridges are made for use with OptimAir TL blowers. Suitable for protection from organic vapors, acid gases, and particulates.

SoftFeel® Hycar rubber or silicone facepiece. Wide-view polycarbonate lens. Threaded cartridges, sold separately. Facepiece only.

MSA OptimAir TL cartridges for ammonia, formaldehyde, acid gases, and particulates.

Battery pack for PAPR assembly, this MSA battery pack provides 4 hours of run time.

Made from Hycar or Silicone. Scratch-resistant polycarbonate lens. Threaded cartridges. Facepiece only.

Silicone facepiece with a rubber harness. Wide-field polycarbonate lens. Facepiece only, adapters sold separately.

SoftFeel® Hycar rubber facepiece. Wide-view polycarbonate lens. Dual-mount cartridges, sold separately.

Hycar rubber facepiece with a polycarbonate lens. Speaking diaphragm. NATO 40mm thread dual canister mount. Facepiece only, canisters sold separately.

Tychem® QC hood for MSA OptimAir TL PAPR kit is made with polyethylene coated Tyvek®. Available as single-bib or double-bib.

This full face respirator from 3M is designed for use with bayonet style cartridges or filters, it offers a soft silicone nose cup and face seal for increased comfort and easy cleaning.

Sperian CBRN gas mask comes with a mesh head net and a chemical resistant butyl rubber face skirt. It has a very wide lens made out of anti-scratch polycarbonate. This lens offers superior vision since line of sight is very important.

Sperian Survivair Opto-Fit Tactical Gas Mask with mesh head net comes with an anti-scratch polycarbonate lens. The three position canister mounting makes the mask adaptable to various applications.

This Sperian CBRN gas mask comes with a five point strap and a chemical resistant butyl rubber face skirt. It has a very wide lens made out of anti-scratch polycarbonate. This lens offers superior vision since line of sight is very important.

These MSA cartridges provide protection from Organic Vapors and hazardous particles, with P100 rating.

These MSA replacement cartridges provide universal protection from a variety of gases and vapors. Use them with Comfo series facepieces

Silicone facepiece, choice of rubber or European-style Advantage harness. Bayonet cartridge connection. Only facepiece - cartridges sold separately.

The 6000 series full-face respirator from 3M accepts multiple cartridge types and provides a good field of vision.

This full mask 3M respirator comes with a connector that accepts standard threaded canisters.

North 760008A full face piece mask has a panoramic lens made out of high impact Polycarbonate. Respirator body is made out of 100% silicone which is soft and flexible and provides a secure fit.

The wide panoramic lens on this full face respirator is made out of high impact Polycarbonate, and provides vision in all directions.

Made from SoftFeel® Hycar rubber, with wide field of view and a speaking diaphragm. Bayonet style cartridge connection. Facepiece only.

Dual-filter, full-face respirator from the Advantage 4000 series. Only 1 unit left.

European-style Advantage harness or rubber harness, silicone facepiece. Single port mask, facepiece only. Adapters, cartridges and canisters sold separately.

Ultimate Reusable respirator from 3M features a silicone facepiece and is made for use with bayonet style cartridges.

Ultra-compact threaded particulate filter. Suitable for use with Comfo Masks.

This FR jacket has 12 oz/yd2 Modacrylic/Rayon/Spandex blend, zipper front, Nomex knit cuffs, fall protection access, 3M 9720 Scotchlite.

For CPA WV-647 and Otterlayer H12 overhoods

The Dyna-Line Horizontal Lifeline System offers relient fall protection with its two worker system, containing a 30’ 12-strand rope and 2 polyester anchorage straps.

protects workers from falls caused by electric arc-flash and/or arc-blast exposure when working at heights or in confined space applications near energized electrical sources.

These Howard Leight Reusable Ear Plugs will fit virtually any sized ear canal with ease, comfort and maximum protection by using its patented SoftFlanges to create a seal worthy of a NRR of 27db.

Replacement shield with the gold film for the 0647 aluminized overhoods

These chemical resistant sleeves are made of Tychem® and are resistant to over 42 chemicals for at least 30 minutes.

14 oz multi-layered fabric system with a Kevlar® blend facecloth and a quilted Aramid® liner. ASTM F1506, NFPA 70E, CSA Z462.

This fire resistant jacket from Chicago Protective is made of Vinex, which is 85% vinyl and 15% polynosic rayon. This fabric offers great protection from aluminum splash and comes in sizes S-3XL.

This MSA heat resistant hard cap resists up 350°F which is ideal for laborers working in industries where elevated temperatures are present. This hard cap complies with ANSI/ISEA Z89.1-2009 (Class G).

These Howard Leight Airsoft Reusable Corded Ear Plugs have an advanced air pocket design relieving pressure and creating a truly comfortable fit while sporting a NRR of 27db.

Category 2 Protection, NFPA 2112 - 2023 Compliant, CSA Z96 Class 1 Level FR. 7.4 oz 47% Modacrylic / 37% Lyocell / 16% Aramid featuring two-way concealed Nomex® taped brass break-away zipper, concealed snap at top of zipper & at neck.

This arc flash face shield kit is made with durable dielectric materials that are resistant to heat and comfortably fit on the worker. Comes with a hard cap, visor, and bracket

3M Peltor corded reusable ear plugs offer triple flanges providing numerous seals against any noise. The come with a cloth cord

These Chicago Protective CarbonX coveralls are fire resistant. They are extremely protective against fire while feeling quite similar to normal fabric. They are ideal for protection from molten splash (like in welding) and other hot temperature hazards.

This fire resistant shirt from Chicago Protective is made of Vinex, which is 85% vinyl and 15% polynosic rayon. This fabric offers great protection from aluminum splash and comes in sizes S-3XL.

MSA’s Skullgard heat resistant hard hat withstand temperature up to 350°F which is ideal for industries where hot temperatures are present. This hard hat meets the ANSI/ISEA Z89.1-2009 (Class G) standard.

Aluminized gloves suitable for up to 2000F radiant heat. These gloves provide protection from sparks and molten splash and offer good abrasion resistance.

Manufactured using natural rubber in ISO manufacturing facilities the rubber insulating sleeves provided by Cementex Products Inc. are compliant with OSHA 1910.137, OSHA 1910.268, NFPA 70E®, CSA Z462, and exceed the AST

These Howard Leight Reusable ear plugs are made from a patented Conforming Material Technology (CMT) that uses your body hear to shape the earplug to your individual canal.

These Howard Leight Airsoft Reusable Corded Ear Plugs have a four-flange profile to create an ideal seal that sports a NRR of 27db. These reusable earplugs come corded to white nylon to make easy to take on and off without misplacing.