Head & Face Protection

4 point ratchet type suspension of this hard hat has ¾” nylon straps. Bullard S61R hard hats meet the requirements of ANSI Z89.1-2003 Classes E and G.

Bullard C33R full brim hard hat features 1 inch wide nylon straps on its 6 point ratchet suspension. This comfortable Bullard hard hat exceeds ANSI Z89.2003, Class E and Type I requirements and adjusts vertically.

The polyethylene hard hat S51R from Bullard has a 4 point ratchet suspension with ¾” nylon straps and height adjustments. These hard hats meet ANSI Z89.1-2003 Class E and Class G requirements.

Slotted V-Gard hard cap from MSA offers superior impact protection. This comfortable and lightweight cap exceeds ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E) requirements.

RefrigiWear Hard Hat comes in Blue, Green, Orange, Red, White and Yellow.

Cooling relief to your head and back of your neck. 100% Polyester Three Dimensional Honeycomb Knit. Mesh panel for breathability. Roll and snap neck shade.

This replacement brow pad from Bullard is made of absorbent cotton fabric and provides additional comfort to the wearer. Fits all hard hat designs from Bullard.

Chemical-free cooling relief that activates in minutes. 100% Polyester Three Dimensional Honeycomb Knit. Has silver thread and camo accents.

Best selling sweatband. Absorbs and wicks away sweat easily and quickly. Easily attaches to hard hat suspension with snaps. Machine washable.

This storage bag with drawstring is made to fit an arc flash hood or face shield with an attached hard cap. It will keep your visor from getting scratched or otherwise damaged for best performance.

The RS4RC ratchet from Bullard was deisgned for standard model Bullard hard hats S51, S61, S62 and S71. It features vertical height adjustments and a 4-point suspension.

Ranger hat with terry liner inside works as sweat absorbent when dry and cooling relief when wet. Powered by Miracool® Crystals Technolog. Wide brim works as shade for face and neck.

These single-color reflective stripes improve visibility and work group identification. They can be attached to all Bullard hard hats. Legion Safety carries Hi-Viz green strips for Bullard hard hats.

Polyester insect net easily attaches to most hard hats and baseball caps. Drawsting with stopper on both sides. 17” W x 17” L.

100% Polyester Three Dimensional Honeycomb knit. Provides chemical-free cooling relief to your head. Either sweat it or wet it for activation. Tie-back. UPF 50+ sun protection.

Bullard Classic series hard hat C30R features a ratchet suspension with nylon straps and exceeds ANSI Z89.2003, Class E, and Type 1 requirements.

This lightweight S51 hard hat from Bullard features a 4-point pinlock suspension, low profile and a low center of gravity. Meets class E and G requirements.

The C30 Classic series hard hat from Bullard exceeds 1 and Class E requirements. It has a 6-point pinlock suspension with nylon straps and front and rear height adjustments.

The replacement suspension for Bullard Classic series hard hats C30 and C33. This ratchet suspension comes with a cotton brow pad and features two front and three rear vertical adjustments.

V-Gard 500 vented MSA hard cap has a 4 point Fas-Trac suspension with vents that adds comfort to the user. This hard hat exceeds ANSI/ISEA Z89.1-2009 (Class C) standards.

Low profile, light weight, low center of gravity and 4-point ratched suspension are all features of the ventilated S62R Bullard Hard Hat, which meets Class C requirements.

Hard hat S61 from Bullard features 3 hardness ridges, a 4-point pinlock suspension and vertical adjustments at front and back. It meets ANSI Z89.1-2003 Class G requirements and Class E requirements.

This MSA V-Gard hard cap comes with a Fas-Trac suspension making it easier to adjust by simply turning a knob. This product also exceeds ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E) standards.

Polyester mesh ranger hat helps in airflow to your head. Has 2” silver reflective tape backed by contrasting fabric. Adjustable drawstring.

Bullard SS6 Sunshield features a see through front for overhead visibility. Protects the face, neck and ears from sun exposure and fits on Bullard hard hat styles C33 and S71.

Cotton neck shade protects back of the neck from UV rays. Soft terry cloth sweatband at forehead for sweat absorption. Worn alone or under hat.

These Crews safety visors are made from PETG material and come in various widths and heights.

Hard and durable polyethylene bump cap protects against bumps, scrapes and scalp lacerations. Has adjustable suspension. Light and comfortable.

100% Polyester Three Dimensional Honeycomb Knit. Provides chemical-free cooling relief for your head and neck. Either sweat it or wet it for quick activation. UPF 50+ sun protection.

Works as a sweat absorbent and keeps you dry and cool. Powered by Miracool® Crystals Technology. Wide brim works as shade for face and neck.

Cotton tie hat absorbs sweat and keeps you cool. Activates in 10-15 minutes after you soak in water. Powered by Miracool® Crystals Technolog. Tie closure.

Cotton full brim hat shade that fits most hard hats. Protects face, eyes, ears and neck from heat stress. 6” circular pouch for storage. HiViz.

This mesh sun shade easily attaches to hard hats. It has a ⅝” silver beaded reflective stripe over a 2” orange contrast fabric and comes with 3 clips that provide a secure fit.

Poly-cotton twill hat shade protects your back of neck from UV rays. One size fits most regular hard hats. Not full brim.

6 point woven nylon suspension with squeeze lock. Has a detachable plush cotton terry front sweatband. Suspension with adjustable size 6 ½ to 7 ¾.

Crews PETG visor with an aluminum frame attaches securely to all of MCR Safety’s faceshield brackets.

Polycarbonate visors from Crews are available in two thicknesses. They attach securely to all of MCR Safety’s faceshield brackets.

Cotton headband absorbs sweat and keeps you dry. Powered by Miracool® Crystals Technology. Activates in 10-15 minutes. Has tie closure.

Made with blend of polyester and spandex, this gaiter can be paired with hat or hood to protect your nose, ears, mouth and neck. Lightweight and flexible. One size fits all.

Cotton bandana keeps you cool. Activates in 10-15 minutes after you soak it in cold water. Miracool® Crystals Technology retain moisture. Assortment of 12 pieces.

Made with blend of merino wool and acrylic, this gaiter protects your nose, mouth, ears and neck from cold. One size fits all.

100% Polyester Three Dimensional Honeycomb Knit. Provides chemical-free cooling relief to your neck. UPF 50+ sun protection.

100% Polyester Three Dimensional Honeycomb knit. Provides chemical-free cooling relief for your head, neck and nose. HiViz color with reflective stripe. UPF 50+ sun protection.

Nylon faceshield bracket from Crews is light and easy to install on most hard hats without a full brim. Its dielectric design makes it safe for electrical work.

These aluminum faceshield brackets are rigid and light. MCR Safety’s bracket 102 is designed to easily attach to most hard hats that do not have a full brim.

Faceshield assembly 103 from MCR Safety is comfortable and economical. It accepts numerous Crews safety visors and has a sparkguard to protect the hair and head of wearer.

This flame resistant CarbonX face mask has the outer material arc flash rated at 16 cal/cm².