Head & Face Protection
32 results(1 filter applied, reset)Legion Safety Products carries a variety of head and face protective gear, including hard hats, hard hat accessories, as well as face shields and visors. Hard hats should generally be worn in areas where workers perform heavy labor and are required in many industries / construction sites where a danger of falling objects is present. Combined with a hard hat accessory, such as a chinstrap and a protective visor, the hard hat becomes a full solution for head and face protection.
MSA V-Gard Hard Caps with Staz-On Suspension
4Slotted V-Gard hard cap from MSA offers superior impact protection. This comfortable and lightweight cap exceeds ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E) requirements.
$13.90Each
Bullard Cotton Brow Pad RBPCOTTON
This replacement brow pad from Bullard is made of absorbent cotton fabric and provides additional comfort to the wearer. Fits all hard hat designs from Bullard.
$5.00Each
Occunomix TD700 Tuff & Dry Wicking and Cooling Baseball Cap
2Chemical-free cooling relief that activates in minutes. 100% Polyester Three Dimensional Honeycomb Knit. Has silver thread and camo accents.
$11.90Each
Occunomix 870 Terry Toppers® Snap-On Hard Hat Sweatband, Individual
2Best selling sweatband. Absorbs and wicks away sweat easily and quickly. Easily attaches to hard hat suspension with snaps. Machine washable.
$2.50Each
Bullard R540 Reflective Striping
These single-color reflective stripes improve visibility and work group identification. They can be attached to all Bullard hard hats. Legion Safety carries Hi-Viz green strips for Bullard hard hats.
$11.40Each
Occunomix V897 Insect Net
Polyester insect net easily attaches to most hard hats and baseball caps. Drawsting with stopper on both sides. 17” W x 17” L.
$4.30Each
Occunomix TD200 Tuff & Dry Wicking and Cooling Skull Cap
3100% Polyester Three Dimensional Honeycomb knit. Provides chemical-free cooling relief to your head. Either sweat it or wet it for activation. Tie-back. UPF 50+ sun protection.
$8.55Each
Bullard S51 Hard Hat - High Density Polyethylene with Pinlock
3This lightweight S51 hard hat from Bullard features a 4-point pinlock suspension, low profile and a low center of gravity. Meets class E and G requirements.
$9.90Each
Bullard High Density Polyethylene Hard Hat S61 with Pinlock
Hard hat S61 from Bullard features 3 hardness ridges, a 4-point pinlock suspension and vertical adjustments at front and back. It meets ANSI Z89.1-2003 Class G requirements and Class E requirements.
$8.00Each
Occunomix LUX-RNG HiViz Ranger Hat
3Polyester mesh ranger hat helps in airflow to your head. Has 2” silver reflective tape backed by contrasting fabric. Adjustable drawstring.
$9.90Each
Occunomix 971 Neck Shade
2Cotton neck shade protects back of the neck from UV rays. Soft terry cloth sweatband at forehead for sweat absorption. Worn alone or under hat.
$3.10Each
MCR Safety Crews Clear PETG Material Visors
3These Crews safety visors are made from PETG material and come in various widths and heights.
$3.50–5.90Each
Occunomix V450 Traditional Bump Cap
6Hard and durable polyethylene bump cap protects against bumps, scrapes and scalp lacerations. Has adjustable suspension. Light and comfortable.
$5.90Each
Occunomix TD201 Tuff & Dry Wicking Tie Hat w/Shade
100% Polyester Three Dimensional Honeycomb Knit. Provides chemical-free cooling relief for your head and neck. Either sweat it or wet it for quick activation. UPF 50+ sun protection.
$10.70Each
Occunomix 962 Miracool® Ranger Hat
4Works as a sweat absorbent and keeps you dry and cool. Powered by Miracool® Crystals Technology. Wide brim works as shade for face and neck.
$12.15Each
Occunomix 952 Miracool® Tie Hat
3Cotton tie hat absorbs sweat and keeps you cool. Activates in 10-15 minutes after you soak in water. Powered by Miracool® Crystals Technolog. Tie closure.
$7.50Each
Occunomix 899 Stow-Away Hard Hat Shade
4Cotton full brim hat shade that fits most hard hats. Protects face, eyes, ears and neck from heat stress. 6” circular pouch for storage. HiViz.
$9.65Each
OK-1 Hi Vis Neck Sun Shade 5057009 - Hard Hat Mount, Mesh
This mesh sun shade easily attaches to hard hats. It has a ⅝” silver beaded reflective stripe over a 2” orange contrast fabric and comes with 3 clips that provide a secure fit.
$5.10Each
Occunomix 898 Hard Hat Shade
4Poly-cotton twill hat shade protects your back of neck from UV rays. One size fits most regular hard hats. Not full brim.
$7.30Each
Occunomix V101 Squeeze Lock 6 Point Suspension
6 point woven nylon suspension with squeeze lock. Has a detachable plush cotton terry front sweatband. Suspension with adjustable size 6 ½ to 7 ¾.
$6.50Each
MCR Safety Crews Aluminum Framed Clear PETG Visors
Crews PETG visor with an aluminum frame attaches securely to all of MCR Safety’s faceshield brackets.
$4.20Each
MCR Safety Crews Clear Polycarbonate Visors
2Polycarbonate visors from Crews are available in two thicknesses. They attach securely to all of MCR Safety’s faceshield brackets.
$2.80–3.90Each
Occunomix 954 Miracool® Headband
4Cotton headband absorbs sweat and keeps you dry. Powered by Miracool® Crystals Technology. Activates in 10-15 minutes. Has tie closure.
$1.90Each
RefrigiWear 6050 – Flex-Wear Neck Gaiter
3Made with blend of polyester and spandex, this gaiter can be paired with hat or hood to protect your nose, ears, mouth and neck. Lightweight and flexible. One size fits all.
$10.00Each
RefrigiWear 0049 – Merino Wool Neck Gaiter
Made with blend of merino wool and acrylic, this gaiter protects your nose, mouth, ears and neck from cold. One size fits all.
$12.50Each
Occunomix TD400 Tuff & Dry Cooling Towel
2100% Polyester Three Dimensional Honeycomb Knit. Provides chemical-free cooling relief to your neck. UPF 50+ sun protection.
$10.35Each
Occunomix TD800 Tuff & Dry Wicking and Cooling Head Gaiter
100% Polyester Three Dimensional Honeycomb knit. Provides chemical-free cooling relief for your head, neck and nose. HiViz color with reflective stripe. UPF 50+ sun protection.
$6.75EachCurrently unavailable
MCR Safety Crews Nylon Faceshield Bracket 101
Nylon faceshield bracket from Crews is light and easy to install on most hard hats without a full brim. Its dielectric design makes it safe for electrical work.
$4.70EachCurrently unavailable
MCR Safety Crews Aluminum Faceshield Bracket 102
These aluminum faceshield brackets are rigid and light. MCR Safety’s bracket 102 is designed to easily attach to most hard hats that do not have a full brim.
$7.20EachCurrently unavailable
MCR Safety Crews Nylon Faceshield Headgear Assy 103
Faceshield assembly 103 from MCR Safety is comfortable and economical. It accepts numerous Crews safety visors and has a sparkguard to protect the hair and head of wearer.
$6.50EachCurrently unavailable
Chicago Protective Apparel Replacement 4.5" x 5.25" Overhood Window - 647-WINDOW
Currently unavailableChicago Protective Apparel Defender 2 CarbonX Face Mask
This flame resistant CarbonX face mask has the outer material arc flash rated at 16 cal/cm².
Currently unavailable
